How to tie the Taut-line hitch

The taut-line hitch makes an adjustable loop for a tent guyline. Slide the hitch to change the tension, then snug it so it grips the standing part.

Type
Friction hitches
Difficulty
Easy
ABOK number
#1856
Best for
Camping

This page shows the common #1856 form: two inner wraps and one outer half hitch. Similar names are also used for related hitches.[1]

Step-by-step: tying the Taut-line hitch

  1. Step 1: Go around the anchor

    Take the working end around a tent stake or other anchor and bring it alongside the standing part.

    Taut-line hitch step 1: the line returns from an anchor beside its standing part.
  2. Step 2: Make two inside wraps

    Wrap the working end twice around the standing part inside the anchor loop. Lay the turns beside each other.

    Taut-line hitch step 2: two turns encircle the standing part on the anchor side.
  3. Step 3: Add the outside half hitch

    Carry the end beyond the first wraps, away from the anchor. Make one half hitch around the standing part in the same winding direction, tucking the end under its own crossing.

    Taut-line hitch step 3: an outer half hitch completes the three-turn structure.
  4. Step 4: Dress and adjust

    Snug the turns together around the standing part and load slowly. Ease the tension before sliding: away from the anchor takes up slack; toward it loosens the line. The wraps are spread out in the diagram so their crossings stay visible.

    Taut-line hitch step 4: arrows indicate sliding the dressed hitch along the standing part.

What the Taut-line hitch is used for

  • Adjusting tent guylines.[2]

Strengths and weaknesses

Strengths

  • Adjusts without retying.[2]

Weaknesses

  • May slip in slick or stiff synthetic rope.[1]

Tips and common mistakes

Tips

  • Test the grip in the actual cord.

Common mistakes

  • Omitting the outer half hitch. Two wraps alone are unfinished.

Variations

  • Midshipman’s hitch — The second inner turn is tucked differently; often preferred for security.[1]

Related knots

  • Rolling hitch — The underlying friction hitch.
  • Trucker’s hitch — A different way to tension a line.

Frequently asked questions

What is it for?

Adjusting a tent guyline.[2]

Which version is shown?

ABOK #1856, with two adjacent inner wraps and a same-direction outer half hitch.[1]

How do I tighten the guyline?

Ease the load and slide the hitch away from the anchor.[1]

Will it grip every rope?

No. Particularly slick or stiff rope can slip.[1]

Sources

  1. Taut-line hitch — Wikipedia — ABOK variants, adjustment and security
  2. Tautline Hitch — NetKnots — guyline use, adjustment and alternatives

Last reviewed: